How to Paint your Xbox 360 Controller

Things you'll need:

* Torx screwdriver T8 Torx security bit

*Spray paint

*Spray Clear coat

1.

* 1

Turn off the controller and remove the battery.

* 2

Flip the Xbox 360 wireless controller upside down.

* 3

Insert a Torx screwdriver with a T8-sized security bit into one of the six holes on the back of the controller.

* 4

Turn the Torx screwdriver counter-clockwise until the screw is loosened, then tilt the controller so it is right-side up and the screw falls out.

* 5

Repeat Steps 3 and 4 until you have removed screws from all six visible holes.

* 6

Peel back the barcode located underneath the controller's battery slot and you'll notice the seventh and final screw. Unscrew this last screw with the Torx screwdriver, and remove the screw from the hole.

* 7

Open the Xbox 360 wireless controller by pulling apart the two halves. The halves should be loose now that all the necessary screws have been removed.

Now take your 2 halves and Paint Away!

There are many different ways to make the controller your own.

. You could paint it a solid color,or a mix.

. You could color it with sharpies, (This is my Girlfriends method)

. You could cut out different comics or magazines apply paste to the back and then stick them on forming a collage, just make sure to clear coat it after to protect your work.

Well there you go, hope you have a blast making your own custom controllers!